#NISSAN CONSULT SOFTWARE DOWNLOAD HOW TO#
#NISSAN CONSULT SOFTWARE DOWNLOAD INSTALL#
#NISSAN CONSULT SOFTWARE DOWNLOAD SERIAL#
#NISSAN CONSULT SOFTWARE DOWNLOAD DRIVERS#

#NISSAN CONSULT SOFTWARE DOWNLOAD SERIAL#

Change COM Port Number to a unused port, ideally between COM2 and COM6 (look at your list of ports and make sure the one you are using is not used) - COM4 is a common one for USB Serial Ports.Right click the 'USB Serial Port (COMX)' and choose Properties, then Port Settings tab, then Advanced.If your COM port is COM20 or higher, you need to change it to a lower port to allow it to work in ECUTalk software (and Scantech requires no higher than COM6).

You will see a 'USB Serial Port (COMX)' where COMX is your COM port you will use in any consult applications. Now to find out the COM port it uses: Start -> Run -> devmgmt.msc -> Expand 'Ports (COM & LPT)'.

Connect ECUTalk USB Cable to USB port - select 'No, not this time' to Windows Update, and then 'Install the software automatically'.

Dont plug the cable in yet - if you have, unplug it and cancel any driver installation prompts/dialogs.

If you have problems with the driver installation procedure below, guides are available for XP, Vista, Windows 7, and Windows 8

#NISSAN CONSULT SOFTWARE DOWNLOAD INSTALL#

Unzip and Install this, using name 'Temp Access' and serial 'PRXQ6HQD98F3UTQF' (without quotes). ECUTalk software has links to drivers, but you can refer to below also. NET Framework 2.0, which practically all Windows PCs should have.

#NISSAN CONSULT SOFTWARE DOWNLOAD HOW TO#

No install required, see the steps in the 'Using the Cable' section at the top on how to download and use. (notably for gauges/logging/fault codes, also has trip meter gauges). Start software to wish to use, and select or edit port settings as required (to find USB COM port, see last step of driver install section below to find COM port number in device manager).Go into the menu (left button) then move cursor to the USBIF item (using right button) and enter (left button). The display should power up and be ready to use.

#NISSAN CONSULT SOFTWARE DOWNLOAD DRIVERS#

Plug the included USB cable into the display (remove dust plug) and the other end into the PC (install drivers for usb if you havent, see below).Install is fairly basic and has only a few steps to it.Run the FTDI VCP Driver Installation (download the file, then right click -> Run As Administrator on the downloaded file).Using the Display's Integrated USB Consult Cable Refer to the user guide for more detailed instructions. Plug the consult plug into car's consult port.Please also refer to the user guide, which may have also been included as a hard copy: There are also different tabs for Fault Codes etc, also for the fuel economy sensors you will need to set your cars injector size (a list of common injector sizes are given at the end of the LCD Displays user guide) and number of cylinders in the options. Double click a gauge to return out of gauges mode. For ECUTalk, you select the port from the dropdown to connect, it will read available sensors, and you can select which ones you wish to see as gauges then click the view gauges button.Download and Run ECUTalk_v1.4.0.exe (click Run anyway if prompted by Windows that its unrecognised file - or 'Actions' then 'More Options' then 'Run anyway' on later versions of Windows).Consult port doesnt get power on accessories. Ensure car is either ON (ignition on, but not running) or RUNNING.Plug other end into laptop USB port (install drivers first!).Install the USB drivers as per the last section on this page (download the file, then right click -> Run As Administrator on the downloaded file).The steps for actually using the cable and software (see Software Available section) are relatively simple: ECUTalk Nissan Consult Cable ECUTalk Nissan Consult Cable / Consult LCD Display Using the Cable

Nissan Consult Software Download